Model:BUM
Metallized Polyester Film Capacitor-BDM
Introduction:
The capacitors are non-inductively wound with a metallized polyester fim dielectric/electrode,encapsulated in flame retardant(UL94, V-O) plastic case and epoxy resib end seal.
Leads Type:
P:UL 1015 or UL1007 stranded PVC insulation wire.
Specifications and dimension:
- Base Specification:
(a) IEC 33 (C0)77:Used for AC motor application
(b) JIS C 4908:Used for electrical apparatus
(C) CNS 4327:Used for electrical apparatus - Climate Category:In accordance with DIN40040 HSF
(a)H=Minimum Limit Temperature:-25℃
(b)S=Maximum Limit Temperature:+70℃
(c)F=Humidity Category:Average relative humidity≦75%, 95% for 30 days per year, continuously;85% for the remaining days,occasionally. - Rated Voltage:250, 300, 350, 400, 450 VAC
- Capacitance Range:3μ F ~ 50 μF
- Capacitance Tolerance:U(- 5%~ +10%), J ( ± 5 % ), K (± 10 % )
- Withstand Voltage:
(a)Between Terminals:R.V. ×√2× 175% for 1 minuite(VDC).
(b)Between Terminals and Case:2×ated voltage +1000V(1500V Min) for 60s.This test occasional self-healing breakdown are allowed. - Disssipation Factor:0.35% at 200V.AC, 60Hz and 25°C
- Insulation Resistance:
(a)Between Terminals:Insulation resistance:more than 1,000 Mohm μF
(b)Between Terminals and Case:2 x Rated voltage + 1000V(1500V Min)
| Dimension: | Unit: mm | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
![]() |
||||||
| Typical Part Number: | Range Voltage: | Tolerance Code: | |||||
|---|---|---|---|---|---|---|---|
| BUP | 106 | K | 2E | CL | 2E 250VAC 2P 350VAC 2S 450VAC |
2F 300VAC 2G 400VAC 2H 500VAC |
U=+10-5% J=+/-5% K=+/-10% M=+/-20% |
| Type | capacitance | tolerance | voltage | terminal screw | |||
| N-no mounting ear. | |||||||





