Metallized Polypropylene Film Capaitor - MPH Type (High voltage capacitor to light up)

SPECIFICATION:
* OPERATING TEMPERATURE：-40°C ~ + 85°C
* CAPACITANCE RANGE：0.0022-0.1MFD.
* CAPACITANCE TOLERANCE±5%(J), ± 10%(K)
* RATED VOLTAGE：1,000~2000VDC.
* DISSIPATION FACTOR： 0.15%MAX AT 20KHz, 25°C
* VOLTAGE PROOF：5,000VDC 1Sec（20℃）
* INSULATION RESISTANCE：
＞30,000MΩ (C≦0.33uF)
＞10,000MΩ/ μF(C＞0.33uF) AT 25℃
* ENDURANCE：THE TEST VOLTAGE 2,500VAC SHALL BE APPLIED FOR 1000HOURS IN THE 85℃ CHAMBER. DURING THIS PERIOD, 1000VAC 20KHZ FOR A PERIOD OF 0.1SEC BE APPLIED ONCE EACH HOUR. AFTER THE TEST. ΔC/C≦10%, ΔDF≦0.15%, ΔIR≧50% OF THE SPECIFIED VALUE.

INTRODUCTION:
* HIGHT STABILITY.
* NON-INDUCTIVE.
* MINIATURE SIZE.
* SELF-HEALING CHARACTERISTICS.
* PLASTIC CAES, EPOXY RESIN FILLED, BOX MADE OF SOLVENT RESISTANT MATERIAL.(PBT 94 V-0)

FEATURE:
＊EMI、Suppressor
＊Electronic Ballast for Lighting and Lamp. (Light up High Voltage capacitor).
＊High Voltage cap for Mosquito Zapper and Electric Shock

TEMPERATURE AND FREQUENCY CHARACTERISTICS:

MPH:

Dimension:

UNIT : (mm)

CAPACITANCE 3A(1000VDC~1250VDC) 3B(1600VDC) 3C(2000VDC) µF CASE CODE W H T P d W H T P d W H T P d 0.0022 C3 13 12 6 10 0.6 13 12 6 10 0.6 13 12 6 10 0.6 0.0022 D1 18 11 5 15 0.6 18 11 5 15 0.6 18 11 5 15 0.6 0.0033 C3 13 12 6 10 0.6 13 12 6 10 0.6 13 12 6 10 0.6 0.0033 D1 18 11 5 15 0.6 18 11 5 15 0.6 18 11 5 15 0.6 0.0039 C3 13 12 6 10 0.6 13 12 6 10 0.6 13 12 6 10 0.6 0.0039 D1 18 11 5 15 0.6 18 11 5 15 0.6 18 11 5 15 0.6 0.0047 C3 13 12 6 10 0.6 13 12 6 10 0.6 13 12 6 10 0.6 0.0047 D2 18 12 6 15 0.6 18 12 6 15 0.6 18 12 6 15 0.6 0.0056 C3 13 12 6 10 0.6 13 12 6 10 0.6 13 12 6 10 0.6 0.0056 D2 18 12 6 15 0.6 18 12 6 15 0.6 18 12 6 15 0.6 0.0068 D3 18 13.5 7.5 15 0.6 18 13.5 7.5 15 0.6 18 13.5 7.5 15 0.6 0.01 D4 18 14.5 8.5 15 0.6 18 14.5 8.5 15 0.6 18 14.5 8.5 15 0.6 0.015 D5 18 17 10 15 0.6 18 17 10 15 0.6 18 17 10 15 0.6 0.05 E1 26.5 15 6 20.5 0.8 26.5 15 6 20.5 0.8 26.5 15 6 20.5 0.8 0.22 E4 26.5 19 10 20.5 0.8 26.5 19 10 20.5 0.8 26.5 19 10 20.5 0.8