Metallized Film Capacitors (Encased) – MXY  

Item No. : Noise Suppression Capacitors (Encased)

metallized film capacitors specification and dimension:

1. Coating: Encapsulated in reinforced flame retardant plastic case sealed with expoxy resin meeting the requirement of UL94V-0.
2. Leads： Encase in plastic case / PVC Wire leads.
3. Climatic Catalogue: -40°C+100°C
4. Capacitance Versus: 0.047mF-0.47mF(X2) ; 0.001mF-0.0047mF(Y2)
5. Rated Voltage(UR): 300VAC (50/60Hz)
6. Capacitance Tolerance: M=±20% K=±10%
7. Insulation Resistance: >30000MΩ (C≤0.33uF) >10000MΩ/ μF(C>0.33uF) AT 25°C
8. Dissipation Factor: <0.3% at 25°C for 1Khz.
9. Voltage Proof: R.V.x430%VDC (2Sec at 25°C )
10. Endurance: The test voltage 344VAC shall be applied for 1000 hours in the 85°C and RH50% chamber.
11. During this period,880VAC 60Hz for 0.1sec be applied once each hour. Δ C/C ≤ 10%; Δ DF ≤ 0.12% (C<1.0mF) ; Δ DF≤ 0.15% (C ≥ 1.0mF) IR ≥ 50% of the specified value. (25°C 1KHz)

Feature:

Capacitor network has one X2 and two Y2 capacitors in a compact package.

1. Excellent common and normal mode capability in a wide capacitance selection.
2. Y2 capacitors grounded to exiernal mounting tab or common lead.
3. Installed cost saving with single packing design.
4. Leads Type： Terminals & UL 1015 or UL1007 stranded PVC insulation wire.
5. SAFETY APPROVALS : VDE DIN EN 60384-14 (VDE 0565) ; EN 60384-14;IEC 60384-15

Application:

1. Radio-frequency interference currents are by-pass.
2. Antenna coupling, Across-the-line, spark killer.
3. EMI and FMI filter,Switching power supply.