ADM Type-(Metallized Polyester Film) Used in fans, air-conditioners, refrigerators, Power Systems (UPS), office equipment,mercury lamps, fluorescent lamps and business machines

The capacitor are non-inductively wound with a metallized polyester film dielectric/electrode encapsulated in flame retardant(UL 94V-0) plastic case(PBT) and epoxy resin and seal.

Used in fans, air-conditioners, refrigerators, Power Systems (UPS), office equipment, mercury lamps, fluorescent lamps and business machines.

Leads Type
S:Tinned copper steel wire radial leads.
W:Soldering terminals.
P:UL 1015 or UL1007 stranded PVC insulation wire.

Base Specification
  • IEC60252-1:2001: Used for AC motor application.
  • JIS C 4908: Used for electrical apparatus.
  • CNS 4327: Used for electrical apparatus.

Climate Category: In accordance with IEC60068-2-3
  • H=Minimum Limit Temperature: -25℃
  • S=Maximum Limit Temperature: +70℃
  • F=Humidity Category: Average relative humidity≦75,
    95﹪for 30 days per year, continuously;
    85﹪for the remaining days, occasionally

Rated Voltage: 100, 180, 250, 300, 350, 400, 450 Vac

Capacitance Range: 0.5μ F ~ 35 μF

Capacitance Tolerance: U(- 5%~ +10%), J ( ± 5 % ), K (± 10 % )

Withstand Voltage:
  • Between Terminals: R.V. ×√2× 175% for 1 minuite(VDC)
  • Between Terminals and Case: 2× rated voltage +1,000V(1500V Min) for 60s
    This test occasional self-healing breakdown is allowed.

Dissipation Factor:
  • 0.35﹪at 200V.AC, 60Hz and 25℃
  • 1.0﹪at 200V.AC, 1KHz and 25℃

Insulation Resistance:
  • Between Terminals: Insulation resistance:more than 1,000M ohm μF
  • Between Terminals and Case: ≧10 MΩ Measured at 100V.AC, 60s. And 25℃